What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
14.06.2025 00:07

so, what happens?
Now when you have a certain ac resistance, then a current flows in a loop.
At one ohm, the resistor has a maximum of 1 watt power.
What is the most inappropriate thing your wife has done in front of you?
but this device (an Inductor) … impedes the rapid changes in the current.
eight
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
It seems Mohan does not understand the difference between a comment and an Answer.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
What does a fuse do?
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
2024–10–14 [Omar Gharbi Omar Gharbi ]
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
What song are you listening to right now? What does it mean to you?
This device then solves the entire problem.
He then describes Rainy Season and Lightning.
There are two important concepts here.
Which document should be pointed out to a holocaust denier?
This is the picture of an electronic coil of wire wound around a core of magnetic material.
[image of Common-mode choke]
A circuit breaker is similar, but is resettable.
Why are black people harassed more by police officers?
One is “what exactly is in a ‘surge protector’ ? ”
2024–10–16 [ OO OLAOYE OYEBODE ]
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
(Dc diagram shown, AC is similar).
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
These are simplified answers to the original question, and does not change anything I wrote above.
Upvotes:
[old diagram got deleted by accident]
How do I become mentally strong?
One
This is where the MOV conducts again, and dissipated the energy.
the problem then depends on "how fast does the fuse operate?".
The bolt then partially travels down the line to your home.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
What does it feel like to "lose your looks" to age?
At least they know the answer if they wanted it.
Barnstars:
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
Why am I always so tired, no matter how much I sleep?
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
Why did you put a guy’s dick in your mouth the first time?
The MOV will conduct when the voltage exceeds 50% of line voltage.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
How does a person become transgender?
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
It also is a device that limits the change in current flow.
So, the voltage could go up to 500 volts, and the fuse will not open up.
Because the load is inductive, the current lags the voltage.(by a bit).
But it can get overloaded, and no longer works.
This one hit behind the barn.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
An AC voltage/ current source, and an ac inductive load.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
For this case there are devices called Metal oxide varistors (MOV).
a photo is worth a thousand words.
Edit 2024–10.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
what exactly is a ‘surge’ protector?
What is lightning?
He then describes the function of a fuse.
but I think this circuit , shows a few more pieces.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
The other is “what does a “fuse” do?”
He then asserts :
I post the exact comment here.
Here is a simplified AC power diagram.
A fuse is a non-resetable over current circuit protector.
This is where this question deviates from being a 'generic' question, and becomes more specific.
First Sentence:
2024–10–10[John johnson John Johnson ]
nine
In schematic diagrams this is the symbol for a fuse:
But… the neutral is now “floating” because of the 1 ohm resistance.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
The third is lightning and “how it gets conducted into a home.”
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
This is 'the assistant's answer'
There are three different concepts here that are getting confused.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
These devices are installed between the “hot” and “neutral” and protective ground.